Showing 1–16 of 44 results
-
$193.99 – $279.99
Ever had your factory knuckle studs loosened, rust, or even shear right off the knuckle? ARP (Automotive Race Products), the world leader in fastener technology, has become an industry standard when it comes to the highest strength and greatest quality fasteners. These studs are made from a superior ARP2000 material – an exclusive, hybrid-alloy developed to deliver superior strength and better fatigue properties.
-
$499.99
Check out our CTF SlimLine Winch Mount Tube Bumper for the 3rd Generation Ford Rangers! These bumpers are tough, look great, and offer great protection and a stable place to mount the winch on your 3rd Gen Ford Rangers! They are constructed from 1 3/4″ .120 wall tubing and MIG welded. They come in a raw finish ready to weld on to the front of your truck.
-
Sale!
$599.99 Original price was: $599.99.$499.99Current price is: $499.99.
The classic CTF Tube Bumper has been protecting Toyota front ends for over 15 years now! Our best selling bumper is constructed from MIG Welded 1 3/4″ DOM Tubing and features headlight saver bars and a small stinger. The bumper comes with pre-notched mounts ready to weld on to your truck.
-
Sale!
$599.99 Original price was: $599.99.$499.99Current price is: $499.99.
Our CTF Ford Ranger pre-runner tube bumper kit is constructed of high quality 1 3/4″ DOM tubing and MIG welded to fit Ford Ranger trucks as well as 1st gen Explorers. The bumper comes with pre-notched weld-on mounts & gussets to solid mount the bumper to the frame of your truck. There is adequate room behind the bumper to fit our universal winch mount plate as well as room for light tabs of your choice.
-
Protect your Differential with our Heavy Duty 1/4″ Dana 60 Diff Cover
-
$299.99
Protect your diff with our heavy duty 1/4″ plate diff cover for the GM Corporate 14 Bolt Axle
-
$287.99
These Longfield 300M Dana 44 U-Joints come with one grease fitting instead of four and are cross-drilled to provide more grease storage. We went with a high-impact aluminum nickel bronze bushing instead of standard bronze to help prevent galling and make these much better for high-speed use. Joints are rebuildable and include full circle c-clips.
-
$325.99
These Longfield 300M Dana 60 U-Joints come with one grease fitting instead of four and are cross-drilled to provide more grease storage. We went with a high-impact aluminum nickel bronze bushing instead of standard bronze to help prevent galling and make these much better for high-speed use. Joints are rebuildable and include full circle c-clips. Just think – only two grease fittings instead of eight.
-
$219.99
The Longfield birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The Longfield birfield housing is made out of forged 4340 chromoly steel. The internals of our Longfield birfields are made out of vacuum arc remelted 4340 chromoly steel and then dual heat-treated for superior strength.
-
$699.99
The Longfield™ birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers.  The Longfield™ birfield housing is made out of forged 4340 chromoly steel. The axle shafts are also made out of 4340 chromoly steel. The internals of our Longfield™ birfields are made out of 4340 chromoly steel and heat-treated for superior strength.
-
Sale!
$599.99 Original price was: $599.99.$499.99Current price is: $499.99.
The CTF Classic tube bumper has been taking hits from rocks on the front of Toyota Trucks for over 15 years! This bumper provides great protection to the front of your truck while looking tough and clean! MIG Welded from 1 3/4″ DOM Tubing and comes with weld on mounts and gussets.
-
$159.99
Extended Brake Lines
These steel braided brake lines are 26″ long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way.
-
$49.99
FJ-80 Tie Rod End
Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greased for life and sealed. Includes cotter pin and jam nut.
Available options:
- Rod End FJ-80 Right Thread, 130586-1-KIT
- Rod End FJ-80 Left Thread, 130587-1-KIT
-
$94.99
IFS Steering Box Mount
If you’re installing crossover steering on your 79-85 4wd Toyota you’re going to need to mount an IFS steering box. This frame mount kit includes both inner and outer frame reinforcing plates, grade 8 bolts, DOM tubing, and Crimp nuts. Inner plate is 3/16″, outer plate is 1/4″. Angled leading and trailing edges prevent frame cracking. Heavy duty design.
-
$159.99
When was the last time you serviced your knuckles? Our service kit contains all standard replacement parts including gaskets, felts, seals, washers, and shims. Kit includes inner axle seals and outer felt covers. The outer felt covers are not found in other kits and are a Trail-Gear exclusive. If you’re using your truck in the rocks you will want to replace these covers when you service the knuckles. Knuckle kit has all the parts you need to service both left and right knuckles
-
$299.99
When was the last time you serviced your knuckles? Our service kit contains all standard replacement parts including gaskets, felts, seals, washers, and shims. Kit includes inner axle seals and outer felt covers. The outer felt covers are not found in other kits and are a Trail-Gear exclusive. If you’re using your truck in the rocks you will want to replace these covers when you service the knuckles. Knuckle kit has all the parts you need to service both left and right knuckles
